Airlay Line - only 4 years old!
3 Bematic bale openers
2 Bematic blenders
2 Bematic Bemablow fine openers, ww: 2.5 m
1 Bematic T-Max 350 airlay system, ww: 2.6 m
1 Bombi thermobonding oven, ww: 2.6 m, double belt, 3 burners, cooling section, calender
1 Bematic cross cutting machine, ww: 2.6 m
Up to 1 200 kg/h
Bombi Double Belt Thermobonding Oven
Working width: 2800mm
Y.O.C. 2014
Configuration: 3 heating sections, each 3.3m long
Integrated Cooling section, 2.5m long
Heated via direct gas burners
Bombi Double Belt Press
Working width: 1200mm
Configuration: Heating section with hot oil plates and 2 calendars. Cooling section with chilled water plates and cold calender.
Available for immediate sale from show room.
Random Velour Line, 4500mm - needle looms also sold independently
2. Thibeau card, Single doffer, can be converted to double doffer easily, Type CA ?. Was used mainly for light products, thats why it was used as a single doffer card. Procduction arround 400 KG, with double doffer 800kg/h.
3. Autefa crosslapper, Type CL 2002, in 2500 mm ww, laying with 7.000 mm, y.o.c. 1998.
4. Fehrer finger feeding device, ww: 4600 mm, 1998
5. Fehrer needleloom NL 9S, y.o.c. 1998, ww: 4600 mm, needling from top, 5.000 needles /mtr., 1200 rpm
6. Fehrer needleloom NL 9S, y.o.c. 1998, ww: 4600 mm, needling from bottom, 6.000 needles /mtr., 1200 rpm
7. Fehrer needleloom NL 9S, y.o.c. 1998, ww: 4600 mm, needling from top, 5.000 needles /mtr., 1200 rpm
8. Dilo RIB Velour needleloom Type VS 45, y.o.c. 1998, ww: 4500 mm, needling from top, 2-3.000 needles /mtr., 1200 rpm
9. Dilo Velour needleloom Type DILOUR 45, y.o.c. 1998, ww: 4500 mm, needling from top, 3-4.000 needles /mtr., 1200 rpm (SOLD)
10. Wumag kalander, y.o.c. 1998, ww: 4.500 mm, 2 smooth rollerm cooling roller
11. Accumulator
Bale Press
Great machine to get rid of trim waste.
Y.O.C. 2010
Schott & Meissner Steam Oven
Working width: 2.500mm
Steam Oven, for phenolic resins, steam generator, barely used, as new, for immediate sale
Automatex Needle Loom, 4000mm
YOC: between 1992-1996
2 boards from top
Needle board densitiy: 2 x 5.000 needles /
meter
Needle board width: 250mm
Strokes: max. 1.200 Strokes/min
CBF: none
2N Needle Loom, 4000mm
OC: 1998/1999
o WW: 4000mm
o 2 boards from top
o Needel board densitiy: 2 x 3.500 needles
/ meter
o Needle board width: 300mm
o Strokes/min: max. 1.100 Strokes/min
o CBF: comes with a Batt feeding system
TecTec QP65 Quadropunch, 6500mm, new, never been in operation
-
Type: QP65
-
Working width: 6.500 mm
-
Y.O.C. 2017
-
Needling: two boards up and two boards down
-
No. of needles: 4 x approx. 5.036 N/m
-
Pattern: 1-W9-33-305-47-5036
-
Stroke: 60 mm
-
Strokes: max. 1.200 rpm
-
Speed: up to 20 m/min
-
Including: Controls system
-
Including control system with Siemens S7