Bombi Double Belt Thermobonding Oven
Working width: 2800mm
Configuration: 3 heating sections, each 3.3m long
Integrated Cooling section, 2.5m long
Heated via direct gas burners
Bombi Double Belt Press
Working width: 1200mm
Configuration: Heating section with hot oil plates and 2 calendars. Cooling section with chilled water plates and cold calender.
Available for immediate sale from show room.
Random Velour Line, 4500mm
2. Thibeau card, Single doffer, can be converted to double doffer easily, Type CA ?. Was used mainly for light products, thats why it was used as a single doffer card. Procduction arround 400 KG, with double doffer 800kg/h.
3. Autefa crosslapper, Type CL 2002, in 2500 mm ww, laying with 7.000 mm, y.o.c. 1998.
4. Fehrer finger feeding device, ww: 4600 mm, 1998
5. Fehrer needleloom NL 9S, y.o.c. 1998, ww: 4600 mm, needling from top, 5.000 needles /mtr., 1200 rpm
6. Fehrer needleloom NL 9S, y.o.c. 1998, ww: 4600 mm, needling from bottom, 6.000 needles /mtr., 1200 rpm
7. Fehrer needleloom NL 9S, y.o.c. 1998, ww: 4600 mm, needling from top, 5.000 needles /mtr., 1200 rpm
8. Dilo RIB Velour needleloom Type VS 45, y.o.c. 1998, ww: 4500 mm, needling from top, 2-3.000 needles /mtr., 1200 rpm
9. Dilo Velour needleloom Type DILOUR 45, y.o.c. 1998, ww: 4500 mm, needling from top, 3-4.000 needles /mtr., 1200 rpm
10. Wumag kalander, y.o.c. 1998, ww: 4.500 mm, 2 smooth rollerm cooling roller
Great machine to get rid of trim waste.
Used Meltblown Line, almost brand new, currently in operation
Suitable to produce medical grade materials for face masks with a BFE of 99%
FOR Mini Card & Crosslapper
Working width: 2.500mm
Lapping width: 3.500mm
Currently being refurbished.
Drive and Control System has been made completely new 2 years ago. All Servo Motor Drive System.
Schott & Meissner Steam Oven
Working width: 2.500mm
Steam Oven, for phenolic resins, steam generator, barely used, as new, for immediate sale
Automatex Needle Loom, 4000mm
YOC: between 1992-1996
2 boards from top
Needle board densitiy: 2 x 5.000 needles /
Needle board width: 250mm
Strokes: max. 1.200 Strokes/min
2N Needle Loom, 4000mm
o WW: 4000mm
o 2 boards from top
o Needel board densitiy: 2 x 3.500 needles
o Needle board width: 300mm
o Strokes/min: max. 1.100 Strokes/min
o CBF: comes with a Batt feeding system
TecTec QP65 Quadropunch, 6500mm, new, never been in operation
Working width: 6.500 mm
Needling: two boards up and two boards down
No. of needles: 4 x approx. 5.036 N/m
Stroke: 60 mm
Strokes: max. 1.200 rpm
Speed: up to 20 m/min
Including: Controls system
Including control system with Siemens S7